Free cookie consent management tool by TermsFeed

Rail Powered Transfer Cart

Rail Powered Transfer Cart
Rail Powered Transfer Cart
Rail Powered Transfer Cart
Rail Powered Transfer Cart

The KPD series low-voltage rail powered transfer cart reduces the AC 380V power supply to AC 36V two-phase through a transformer, and connects to two rails respectively. The wheels on the rail flat car introduce the AC 36V power supply on the rail into the on-board electrical box, and the AC 36V is rectified to DC 36V through the rectifier module, and then the DC motor is controlled by the DC control system to start, stop, move forward, backward, and adjust the speed of the flat car.

rail_powered_transfer_cart_(1).jpg

KPD-20t rotary table low-voltage rail powered transfer cart use transport hot billets, cold rolling, running without cables, can be used for medium and long distance transportation, and adapt to various occasions such as turning, circular routes, climbing, etc., and can realize lifting, fully automated unmanned operation and other functions to improve production efficiency, 1-800T load capacity, used for the transportation of large steel parts.

The advantages of wireless operation and large load-bearing capacity are affected by the length of steel and steel pipes. When transporting steel and steel pipes, most of them are large table platforms, which can realize the side rollover and self-unloading of the table, which is convenient for operation. Removable guardrails are often installed on both sides of the table to ensure that the steel and steel pipes will not roll off during transportation, and to facilitate the self-unloading of the flat car.

In the process of welding cylindrical workpieces such as round steel and reaction tanks, the workpiece needs to be rotated to achieve 360-degree welding. The track is laid on the ground to connect to the flaw detection room. The roller bracket is installed on the table of the track flat car. The roller is driven by the motor reducer to rotate, thereby driving the rotation of cylindrical workpieces such as round steel. After welding is completed, it is transported to the flaw detection room. Driven by the rotation of the roller, 360-degree detection is achieved.


rail_powered_transfer_cart_(4).jpg

KPD-20T Rotating Table Low-voltage Rail Transfer Cart Safety Operation Procedures

1. Before working, the operator must check whether there are obstacles on the track, and the electrical circuits and control switches are safe and reliable.

2. The electric flat car must be started smoothly after the bell rings, and pay attention to any abnormal situation around it, and be ready to stop at any time. Do not collide with the end stop of the track.

3. The electric flat car should be operated slowly, and the direction of travel is not allowed to change quickly.

4. During the operation of the electric flat car, maintenance and cleaning are prohibited.

5. When transporting goods, the electric flat car is not allowed to be overloaded, and the items should be evenly distributed.

6. After a major repair, the electric flat car must be inspected and accepted by the user unit and allowed to be used only after it meets the safety requirements.




                                                                                                              ABOUT LEINA  HEAVY INDUSTRY


trackless_transfer_cart_manufacturer.jpg

Rail_transfer_cart.jpg


Contact with us
Contact us for a better solution quotation.

The products displayed on the website are customized according to customer requirements. You can tell us your needs (Capacity, Size, Rail, Raileless, Sope, Hi-temperature, etc.), and we will provide you with a better quotation plan.