Electric rail transfer carts are gradually being used by many companies for their unique advantages. However, how to operate the electric rail transfer cart correctly to ensure the safe and effective operation of the transfer cart is an issue that cannot be ignored.

To operate the electric rail transfer cart correctly, the following points should be achieved:

1. The user unit must arrange a special person to operate and maintain the electric rail transfer cart. Before use, the operator must read the product manual in detail to understand the performance and maintenance knowledge of the rail transfer cart.

2. No items unrelated to transportation are allowed to be placed within one meter on both sides of the transfer cart's running track.

3. The materials should be evenly distributed on the transfer cart table, and overloading is strictly prohibited.

4. The electric rail transfer cart must start smoothly after the bell rings. During operation, the operator must concentrate, always pay attention to whether there are any abnormal conditions around, and be prepared to stop at any time. During operation, the transfer cart must not touch the "iron stop" at the end of the track.

5. During operation, the electric rail transfer cart should run slowly, and it is strictly forbidden to change the direction of travel at a fast speed.

6. During operation, it is forbidden to inspect and clean the rail transfer cart, and it is strictly forbidden to use the electric rail transfer cart to hit, hit, drag, or pull other vehicles or objects on the track.

7. After major repairs, it must be accepted by the user unit and meet safety requirements before it can be put into use again. It is strictly forbidden to operate with defects.

8. In case of sudden power outage during work, the control switch should be returned to zero position; after work is completed, the power must be cut off, the load must be unloaded, and the equipment must be cleaned.

9. When using the transfer cart for the first time, be sure to add reducer gear oil. During use, ensure that the reducer has sufficient lubricating oil, and check whether it is short of oil and change oil frequently.